Machines



Please wait while loading
 

Search selection
 
Type : Subtype :
Manufacturer : Model :
Age : Country :
 
     
Machines found for this search: 63
 
 
 
Total pages:
1 - 2
- 1 - 2 - Next >
 
 

Sort this columnManufacturerSort this columnModelDescriptionSort this columnYearSort this column Sort this columnPicture
COLCHESTER
TORNADO 200Colchester Tornado 200 CNC Lathe with Fanuc OT Control 12-Station VD1 Turret with Tooling 10 3-Jaw Chuck 530mm Swing over bed 400mm distance between..
1996
United Kingdom
HARDINGE
TALENT 8/52This Hardinge Talent 8/52 slant bed CNC Lathe with Fanuc Series Oi-TB Control was built in 2006, has been very..
2006
United Kingdom
HURCO
TM6CNC Lathe with UltiMax Control Specification: 230mm Swing Over Cross Slide 254mm Max Turned Dia 377mm Max Turned Length 45mm Bar Capacity 60-6000rpm Spindle Speeds 11kW Spindle..
2005
United Kingdom
XYZ
1630XYZ Proturn SLX 1630. YOM 2006 with 8 3 jaw chuck, tailstock, quick change tool post and holder set. ** STOCK..
2006
United Kingdom
DAEWOO
LYNX 220LMDaewoo Lynx 220LM with Fanuc control, C-Axis, driven tools, collet chuck, 3 jaw chuck, toolsetter, parts catcher, tailstock, barfeed &..
2006
United Kingdom
HARDINGE
TALENT 6-45 LTCThis Hardinge Talent 6-45 LTC Slant bed CNC Lathe with Fanuc Series Oi-TB Control was built in 2006 and supplied..
2006
United Kingdom
COLCHESTER
TORNADO T8MSSwing over bed 510mm, Spindle centre height from floor 960mm, Max machining diameter 290mm Max turning length 490mm, Spindle speed 5000rpm,..
2007
United Kingdom
HARRISON
ALPHA 1330 UHarrison Alpha 1330 U manual/ CNC lathe with Fanuc 21iT control, 3 jaw chuck and 8 station Duplomatic turret. Control Fanuc Turning..
2008
United Kingdom
MORI SEIKI
NTX 2000/1500Turning Dia: 660mm Turning Length: 1540mm Spindle Speed: 5000 RPM Mill Turn Spindle Speed: 1200 RPM 40 Station Tool Changer Tailstock Swarf Conveyor Hydraulic Steady 20-165mm Through Tool..
2012
United Kingdom
HARDINGE
QUEST 8 51Hardinge Quest 8 51 CNC Driven Tool Sub-Spindle CNC Lathe and Bar feeder, 2005, S/N qc-671, Fanuc 16i-T, Driven tooling,..
2005
United Kingdom
EMCO
365 C AXISEMCOTURN 365 C Axis, 2000, s/n R6A V06 R6A N1502, Siemens 840D Control, C axis,12 Stn Turret, ML1 Short Mag..
2000
United Kingdom
EMCO
365MC Y AXISEMCO 365MC Y Axis, 2004, s/n R6A V12 R6CS2401, Siemens 840D Control, C & Y Axis, 12 Stn Turret, MX1B..
2004
United Kingdom
CHEVALIER
FCL-820MCCHEVALIER CNC Turning Center Type:FCL-820MC Year:2007 Control:SIEMENS SINUMERIK 810 XZ travel:176x520mm Max. rotating diameter:470mm Max. processing diameter:280mm Max. processing length:508mm Spindle speed:4500rpm Tailstock stroke:425mm Height from bed foot to spindle..
2007
Belgium
HAAS
TL15CEHaas TL15CE, 2002, s/n 65660, Sub Spindle Driven Tool C Axis, 8%u201D Main Chuck, 5%u201D Sub Spindle Chuck, Hainbuch Collet..
2002
United Kingdom
MAZAK
INTEGREX 70CNC Hollow Spindle Lathe Swing over Bed: 900mm (36") Swing over Cross Slide: 750mm (30") Distance Between Centres: 2200mm (88") Spindle Speeds: 0 -..
1998
United Kingdom
HARRISON
TORNADO T4CNC Lathe HARRISON TORNADO T4, bar feeder Year of production: 2007 Control: CNC FANUC 21i TB Turning diameter over bed: 410 mm Max...
2007
Poland
MAZAK
INTEGREX E500Installed 2007 Length between centres 3000mm. Hydraulic steady Under Power. 12000 hours on spindle...
2005
United Kingdom
DOOSAN
LYNX 220LCDoosan Lynx 220LC, 2016, s/n ML0022-006501, Fanuc i Series Control, 203mm Power Chuck, Toolsetter, Parts Catcher,Multifeed short mag bar ..
2016
United Kingdom
DAEWOO
PUMA 2500YCNC LATHE (WITH DRIVEN TOOLS) Control:Fanuc Series 18i - TB Turning Dia:600mm Turning Length:510mm Spindle Bore:76mm Speeds: 3500 RPM Machine..
2006
United Kingdom
XYZ
SMX 2000-2XYZ SMX 2000-2 with ProtoTrak SMX control 3HP spindle motor R8 variable speed spindle Low volt light Z-Axis DRO scale on knee...
2011
United Kingdom
XYZ
SM 2000-3XYZ SM 2000-3 with 3-Axis Prototrak SM control 3rd controlled axis on the quill 3HP R8 vari speed spindle Low volt light Stand on..
2004
United Kingdom
XYZ
SMX 2000XYZ SMX 2000 with ProtoTrak SMX 2-Axis control system, R8 vari speed spindle, electronic handwheels coolant equipment and base splash..
2009
United Kingdom
EMCO
E65EMCOTURN CNC Turning Centre Type:E65 Year:2008 Control:SIEMENS SINUMERIK 810 XYZ travel:210x40x610mm Max. turning diameter:500mm Swing over bed:610mm Distance between centers:680mm Spindle speed:5000rpm Spindle bore:65mm Toolchanger: 12atc With short bar loader Machines size-LWH:3000x1800x2150mm Lots..
2008
Belgium
XYZ
KRV2000XYZ KRV2000 YOM 1998 with 3HP Variable Speed Head, 50 x 10 (1270x254mm) Table, 30 x 16 (750x380mm) Travel Specification: Spindle drive..
1998
United Kingdom
FAT
TUR 630MNFAT CNC Turning Centre Type:TUR 630MN Year:1999 Control:SIEMENS Distance between centres:3000mm Swing over bed:630mm Spindle bore:103mm Bore with chuck mounted:80mm Spindle speeds:2-2500rpm Bed width:433mm Machine weight:4100kg Complete with hydraulic chuck..
1999
Belgium
HAAS
TL-2Haas TL-2, 2008: s/n 3081028, Swing over apron 406mm, swing over cross slide 282mm, Distance between centres 1219mm, Spindle speed..
2008
United Kingdom
HWACHEON
HIECO 45 (HITECH 700)CNC Turning- and Milling Center HWACHEON HiEco 45 (HiTech 700) Control: Fanuc 18- TB turning diameter: 700 mm turning length: 2000..
2003
Germany
OKUMA
MAC TURN 250 WCNC Turning- and Milling Center OKUMA Mac Turn 250 W Newin: 2002/2004 Control: OSP U 100 L turning diameter: 530 mm turning length:..
2004
Germany
GILDEMEISTER
CTX 800 BETA MYCNC Turning- and Milling Center GILDEMEISTER CTX 800 Beta MY Control: Heidenhain Turnplus turning diameter: 410 mm turning length: 960 mm turning..
2012
Germany
OKUMA
LB25II-T-MSwing over bed: 620 mm Max turning diam x length: 420 mm x 300 mm Spindle speed: 65-3500 rpm / life..
1995
Belgium
OKUMA
LB25 TSwing over bed: 480 mm Max turning diam x length: 360 mm x 300 mm Spindle speed: 65-3500 rpm Turret 12 tools With..
1991
Belgium
FAT
TUR 1100 MNFAT CNC Turning Centre - AS NEW Type:TUR 1100 MN Year:2012 Installed:2014 Control:SIEMENS 840D Swing over bed:1100mm Swing over carriage:790mm Centre distance:5000mm Speed range:4-1200rpm 4-jaw chuck:1000mm 3-jaw chuck FORKHARDT:500mm Approximately..
2012
Belgium
OKUMA
B200II-W750Mfg. year 12/2012 / Installed 2013 Okuma OSP-P300S control Max. turning diameter 600 mm Max. turning length 750 mm movements: X-axis: 500 mm Y-axis: 160 mm Z-axis:..
2013
Germany
NAKAMURA
TW-20 MMYYFanuc 18 iTB control Max. turning diameter 215 mm Max. turning length 190 mm Bar working capacity 65 mm spinlde motor left 15/11 kW max...
2006
Germany
NAKAMURA
TMC-12 + GANTRY LOADER GR-103S/No. R04101 Fanuc 21-TA control Max. turning diamter 180 mm Max. swing diameter over bed 300 mm Max. turning length 200 mm Max. bar working..
1998
Germany
NAKAMURA
SUPER NTX-SS/No. V300901 Fanuc 16i-TB Luckbei-Dialog System Supercap Max. turning diameter Upper turret 390 mm Lower turret 300 mm Max. turning length 1.100 mm Max. bar..
2007
Germany
NAKAMURA
SUPER NTM3Mfg. year 2008 / Installed 2011 max. turning diamter 190 mm max. bar working capacity 65 mm max. turning length Upper turret 205..
2008
Germany
MAZAK
QUICK TURN NEXUS 250-II MYMazatrol Matrix Nexus control Main spindle AC 26 kW Spindle nose A2-8 Main spindle max. speed 4.000 rpm max. turning diameter 380 mm bar working..
2007
Germany
MAZAK
QUICK TURN NEXUS 200-II MMazatrol Matrix Nexus control Max. turning diameter 380 mm Turning length 538 mm Bar working capacity 65 mm Spindle motor 22/26 kW Max. spindle speed..
2007
Germany
MAZAK
QT NEXUS 100Mazatrol 640 T Nexus Max. turning diameter 280 mm Max. swing diameter 550 mm Max. turning length 309 mm movements X/Z 190 mm/330 mm rapids..
2006
Germany
MAZAK
INTEGREX 200 SYCNC Multitasking Machine MAZAK INTEGREX 200 SY + FLEX GL-100C MAZATROL 640 MT control max. turning diameter 540 mm Z-axis movements 1.065 mm Main spindle,..
2001
Germany
HYUNDAI
HIT 20MSiemens 840D control Max. turning diameter 250 mm Max. turning length 620 mm Max. bar working capacity 65 mm 12-station turret Driven tools C-axis spindle motor main..
2002
Germany
DMG MORI
CLX 450 V4Siemens 840 D control Max. turning diameter 400 mm Max. swing diameter 700 mm Max. turning length 800 mm Main spindle A2-8 spindle nose Spindle..
2017
Germany
GILDEMEISTER
NEF 400 V1Type of control CNC (Siemens 840 D Powerline) turning diameter 400 mm turning diameter over bed slide 270 mm turning length 650 mm rapid speed 15 m/min spindle bore 65 mm speeds 4000..
2008
Germany
HARDINGE
COBRA 42Control: Fanuc 21-T Max cutting: Diameter 209mm, length 355mm Bar capacity: 42mm vis a 16C collet style spindle Spindle speed: 5000 rpm Tool size:..
2004
United Kingdom
XYZ
PROTURN 360Electronic Lathe. Control Proto TRAK LX3 Distance Between Centres 1000mm Swing Over Bed 470mm Swing Over Cross Slide 230mm Cross Slide Travel 330mm Tool Section 25..
-
United Kingdom
MAZAK
INTEGREX 70YB4000 CNC Lathes & Milling Machine X-axis: 750/900 mm, Y-axis: 150 mm, Z axis: 4000 mm, B-axis: 210, Maximum Speed..
2001
United Kingdom
MAZAK
FJV 60/80CNC Vertical milling center X axis: 2000 mm,Y axis: 1400 mm,Z axis: 585 mm,Controler: Mazatrol 640M CNC,Table size: 2240 x..
2005
United Kingdom
MAZAK
NEXUS VMC 510C3 Axis Vertical Machining Centre with Mazatrol 640m Nexus Control System, Maximum Spindle Speed 12000rpm, Axis Travels X=1050mm Y=510mm Z=510mm..
2006
United Kingdom
MAZAK
VARIAXIS 630-5X II5 Axis Vertical Machining Center with Mazatrol Matrix CNC Control System, Maximum Spindle Speed 12000rpm, Axis Travels X=630mm Y=765mm Z=510mm..
2006
United Kingdom

- 1 - 2 - Next >
Back
Sitemap | User Agreement | Privacy | Disclaimer

©2001-2019 UMTN Limited. All rights reserved.