|
|
CMZ
|
5 | CMZ 5 HAND SWAGER complete with 2 sets of wheels and key...
|
- |  |  |
BATY
|
R11 | BATY MODEL R11 SHADOWGRAPH HORIZONTAL BEAM 2D PROFILE PROJECTOR
2 axis digital readout and depth control, mounted on lockable steel cabinet,..
|
- | |  |
MEDDINGS
|
S32ME | MEDDINGS S32ME 3MT PILLAR DRILL
8 speeds 70 – 2940 RPM, power down feed, rise and fall head, 500mm x 350mm..
|
- | |  |
BOXFORD UNION
|
2MT | BOXFORD UNION 2MT PILLAR DRILL
8 speeds 82 – 2900 RPM, 300mm diameter rise and fall swing away table, kick stop,..
|
- | |  |
BS
|
BS460G | BS460G SEMI-AUTO 330mm HORIZONTAL BANDSAW
460MM X 250 / 330mm capacity, 2 speeds 40/80 m/min, double mitre to 60 degrees,..
|
- | |  |
SHORTE
|
20SWG | SHORTE ENGINEERING SINGLE SIDED 20 swg LOCKFORMER
Pittsburg rollers fitted. Single phase 240 volt.
..
|
- | |  |
HBM
|
SRG-40 | HBM SRG-40 INITIAL PINCH HAND ROLLERS 1050mm x 50mm, top slip roll, 2013 m/c...
|
- | |  |
WALTON
|
50 X 3 | WALTON 50in x 3in INITIAL PINCH HAND ROLLS, slip end...
|
- | |  |
SHORTE
|
1.6MM | SHORTE POWER FLANGER
16 swg / 1.6mm capacity for producing 90 degree flange on curved or straight ducts. 240 volt single..
|
- | |  |
EDWARDS
|
6FT | EDWARDS 6ft x 12 swg HAND BOX AND PAN FOLDER
Full set of tooling.
..
|
- | |  |
EDWARDS
|
6FT | EDWARDS 6ft x 18 swg TREADLE GUILLOTINE c/w front and rear sheet supports...
|
- | |  |
ARBOGA
|
ER125S | ARBOGA ER125S 24in RADIAL ARM DRILL
3 MT spindle, 4 speeds 200, 345, 2100, 3600 RPM, Rise and fall arm, 500mm..
|
- | |  |
EDWARDS
|
100 X 1/8 DD | EDWARDS TRUECUT 2500 X 3MM DIRECT DRIVE MECHANICAL GUILLOTINE
Front supports, interlocked rear enclosure, foot pedal control, hand back stop, lighting.
..
|
- | |  |
KEETONA
|
HYDROFORM 100 X 1/4 | KEETONA HYDROFORM 100" x ¼" / 2500mm x 6mm HYDRAULIC FOLDER
Full set of reground tooling.
..
|
- | |  |
PRODUCTION MACHINES
|
150 X 3 | PRODUCTION MACHINES 150mm X 3mm HYDRAULIC CORNER NOTCHER
Foot pedal control, table stops.
..
|
- | |  |
KITCHEN AND WALKER
|
KWM 32-1000 | KITCHEN AND WALKER KWM 32-1000 RADIAL ARM DRILL
1000mm arm, speeds 56 – 2800 RPM, 4MT spindle with power down feed..
|
1995 | |  |
STARTRITE
|
30RWS | STARTRITE 30 RWS VERTICAL BANDSAW
30in throat x 10in daylight, inf var speeds 16 – 900 m/min, 20.5in x 20.5 in..
|
- | |  |
JONES & SHIPMAN
|
1400 | JONES AND SHIPMAN 1400 HORIZONTAL SPINDLE SURFACE GRINDER
24in x 8in capacity with fine pole mag chuck, power elevation to the..
|
1998 | |  |
GEMENI
|
SCNC 1000 | GEMENI SCNC 1000 DC x 2000 mm.
CNC lathe with GE FANUC Series O-TF.
New 1990
Turning diameter 1.000 mm.
Turning length 2.000 mm.
Chuck..
|
1990 |  |  |
ESAB
|
LAN315 | ESAB LAN 315 MIG WELDER WITH A10 MEH30 REMOTE WIRE FEED UNIT
315 amps capacity, 5m Binzel torch, earth clamp, new..
|
- | |  |
KEETONA
|
HYDROFORM | KEETONA HYDROFORM 2500mm x 3mm HYDRAULIC FOLDER
Full set of reground tooling, front supports.
..
|
- | |  |
KEETONA
|
HYDROFORM | KEETONA HYDROFORM 2500mm x 3mm HYDRAULIC FOLDER
Full set of reground tooling, front supports, foot pedal control for top beam or..
|
- | |  |
MORGAN
|
2M X 100MM | MORGAN 2m x 100mm POWERED INITIAL PINCH ROLLS
Slip bottom roll, foot pedal control.
..
|
- | |  |
GREIF
|
BACK STAND | GRIEF BACK STAND LINISHER
1.1 Kw / 1.5 HP motor drive, 100mm wide belts, 750 RPM motor speed, variable angle.
..
|
- | |  |
BROOMWADE
|
COMPAIR 6000E | BROOMWADE COMPARE 6000E 120 CFM SCREW COMPRESSOR
Model 6030E08A, mounted in an acoustic cabinet, 22.5 Kw motor, 8 BAR max pressure,..
|
- | |  |
HARRISON
|
M250 | HARRISON M250 STRAIGHT BED LATHE
20in x 5 ½in, speeds 40 – 1500 RPM, 3 & 4 jaw chucks, quick change..
|
- | |  |
ESAB
|
LAX380 | ESAB LAX 380 MIG WELDER WITH MEK2 WIRE FEED UNIT
380 amp capacity, fitted with 1.2mm wire, Binzel torch, earth clamp..
|
- | |  |
MILLER
|
BLU-PAK 45 | MILLER BLU-PAK 45 MIG WELDER WITH 20 SERIES REMOTE WIRE FEED UNIT
450 amp capacity, new roll of 1.2mm wire, new..
|
- | |  |
BRIDGEPORT
|
SERIES 1 2HP | BRIDGEPORT SERIES 1 2HP TURRET MILLING MACHINE
Inf var speeds 50 – 3750 RPM, 42in x 9in table with power feed..
|
- | |  |
ADDISON
|
VBS400 | ADDISON VBS 400 VERTICAL BANDSAW
400mm throat, 220mm daylight, inf var blade speeds 28 – 420 m/min, 570mm x 610mm compound..
|
- | |  |
PEDRAZOLLI
|
BROWN 350 | PEDRAZZOLI BROWN SN350 HORIZONTAL MITRE BANDSAW
275mm capacity, hydraulic downfeed or pull down operation, 2 blade speeds, single mitre to 60..
|
2004 | |  |
JONES & SHIPMAN
|
540L | JONES AND SHIPMAN 540 L HORIZONTAL SPINDLE SURFACE GRINDER
18in x 6in mag chuck, power elevation to head, extra height to..
|
- | |  |
JONES & SHIPMAN
|
540L | JONES AND SHIPMAN 540 L HORIZONTAL SPINDLE SURFACE GRINDER
18in x 6in mag chuck, power elevation to head, extra height to..
|
- | |  |
CMZ
|
6 | CMZ 6 POWERED SWAGING MACHINE
275mm throat, 1.6mm capacity, forward and reverse operated by double foot pedal.
..
|
- | |  |
FABRIS
|
250MM | FABRIS 250MM PULL DOWN CUT OFF SAW
Double mitre to 45 degrees, single speed, new blade, coolant, mounted on stand.
..
|
- | |  |
HARRISON
|
M450 | HARRISON M450 GAP BED LATHE
2m x 225mm, speeds 40 – 2000 RPM, 3 & 4 jaw chucks, fixed 3 point..
|
- | |  |
HPC
|
AS31 | HPC AS31 SCREW COMPRESSOR
18.5 Kw, 10 BAR, 92 CFM, 24726 hours.
..
|
- | |  |
THERMAL ARC
|
TIGWAVE 350 | THERMAL ARC TIGWAVE 350 AC/DC TIG WELDER
400 amp capacity @ 25% duty cycle, water cooled torch, earth clamp, regulator.
..
|
- | |  |
IMET
|
SIRIO 370 | IMET SIRIO 370 SEMI-AUTO CUT OFF SAW
Double mitre head to 60 degrees & 45 degrees, power vice and downfeed, 2..
|
2003 | |  |
APEX
|
350 | APEX 350 DOUBLE ENDED GRINDER
14in x 2in wheel ( both wheels are approx 10in diameter), eye shields, dressing tool.
..
|
- | |  |
PEDRAZOLLI
|
PERRIS 350 | PEDRAZZOLI PERRIS 350 NON-FEROUS SAW
350mm blade, double mitre with compound head.
..
|
- | |  |
WALTON
|
HFM 157/20 | WALTON HFM 157/20 STRAIGHT HAND FOLDER
4m x 1mm / 157in x 20 swg capacity. 1999 m/c.
..
|
1999 | |  |
ANBAS
|
TR300 | ANBAS TR300 PULL DOWN MITRE BANDSAW
2 blade speeds, 250mm capacity, single mitre to 60 degrees, electric coolant system, quick release..
|
- | |  |
ABWOOD
|
TG170 | ABWOOD TG170 OFF HAND TOOL GRINDER
Forward and reverse, tilting sprung tables, one diamond wheel, coolant system.
..
|
- | |  |
MEBA
|
400G700 | MEBA 400G700 SEMI AUTO DOUBLE COLUMN MITRE BANDSAW
400mm x 700mm capacity, single mitre to 60 degrees with power movement and..
|
1998 | |  |
KITCHEN AND WALKER
|
E3 | KITCHEN AND WALKER E3 5FT RADIAL ARM DRILL
5 MT spindle, speeds 12 – 1000 RPM, read stop, coolant, lo-volt lighting,..
|
- | |  |
CAMARC
|
CR400 | CAMARC CR400 MIG WELDER WITH CR2 REMOTE WIRE FEED UNIT
400 Amp capacity, Binzel torch, earth clamp, regulator, new roll of..
|
- | |  |
INGERSOLL RAND
|
49811763 | INGERSOLL RAND 49811763 22 CFM COMPRESSOR
Fully automatic, mounted on 200 Ltr horizontal receiver. 2008 m/c.
..
|
2008 | |  |
ESAB
|
LKB265 | ESAB LKB 265 COMPACT MIG WELDER
265 amp capacity, 5m Binzel torch, earth clamp, regulator, new roll of 1mm wire.
..
|
- | |  |
LTE
|
SWALLOW | LTE SCIENTIFIC OVEN
Stainless steel body, 27in x 27in x 30in outside, 19in x 19in x 21in inside dimensions, digital control.
..
|
- | |  |
SCHIESS
|
RFH 30 | SCHIESS RFH 30 CNC Internal Gear Hobber
Ask us about this machine
Built 1982, New CNC SIEMENS 840 D 2005.
Sold as new..
|
1982 | |  |
ESAB
|
ORIGO C280 PRO | ESAB ORIGO C280 PRO COMPACT MIG WELDER
280 Amp capacity, complete with Binzel torch, earth clamp, regulator, new roll of 1mm..
|
- | |  |
ESAB
|
LKB320 | ESAB LKB320 COMPACT MIG WELDER
320 amp capacity, Binzel torch, earth clamp, regulator, new roll of 1mm wire.
..
|
- | |  |
PARWELD
|
XTM404S | PARWELD XTM404S 400AMP MIG WELDER WITH WF400 REMOTE WIRE FEED UNIT
4 roller wire feed with 1.2/ 1.0mm & 0.8 /..
|
- | |  |
AMADA
|
220 X 3 | AMADA CSW-220 HYDRAULIC CORNER NOTCHER
220mm x 3mm capacity, notching table on rear of machine, foot pedal or hand control, angular..
|
- | |  |
LINCOLN
|
BESTER MAGSTER 450 | LINCOLN BESTER MAGSTER 450 MIG WELDER WITH PDE51 REMOTE WIRE FEED UNIT
420 Amp capacity, Binzel torch, earth clamp, regulator.
..
|
- | |  |
MIRACLE
|
NO 3 | MIRACLE No3 HEAVY DUTY 6in BAR BENDER...
|
- | |  |
HARRISON
|
M300 | HARRISON M300 STRAIGHT BED LATHE
Speeds 58 – 2500 RPM, 3 & 4 jaw chucks, quick change toolpost, chuck guard, coolant,..
|
- | |  |
KITCHEN AND WALKER
|
E2 | KITCHEN AND WALKER E2 4’6” RADIAL ARM DRILL
4MT, raiser block fitted into the column, Speeds 25 – 1560 RPM, power..
|
1982 | |  |
POLLARD
|
150A | POLLARD 150A 3 SPINDLE PILLAR DRILL
3MT spindles all with power down feed, 2 heads 86 – 1920 RPM with reverse,..
|
- | |  |
MECOF
|
CS 50 | MECOF CS 50 CNC Universal Milling Machine, 1997
Ask us about this machine
SELCA S3045L, Built 1997,
Two axis Head C-Axes 360° x..
|
1997 | |  |
FPT
|
MAR-X | FPT MAR-X, 2003
CNC SELCA 4045 PLUS DIGITAL, Built 2003,
FPT TRT25. Rotary Table, 25 Ton.
Two axis Head, 144 x 144.
Previous owner..
|
2003 | |  |
MAG G & L HBM
|
MC1600 | MAG G & L HBM MC1600 Twin Pallet CNC Horizontal Borer.
6-Axes Horizontal Borer.
X=3.600, Y= 2,600, W= 2.000, Y=2.600, Z= 1.250..
|
2011 | |  |
SCHARMANN
|
HEAVYCUT 3.2 / TDV 5 | Scharmann Heavycut 3.2 / TDV 5
CNC Siemens 840 C. New: 1980. Modernized with new CNC etc ca 2000.
With Rotary table..
|
1980 | |  |
BUTLER
|
8IN TOOLROOM | BUTLER 8in PRECISION TOOLROOM SLOTTER
40 – 105 SPM, tilting ram to 5 degrees, 20in throat depth to back of the..
|
- | |  |
TSK
|
250 | TSK 250 TILTING ROTARY TABLE..
|
- | |  |
SIP
|
25 KVA | SIP 25 KVA SPOT WELDER
500mm throat, will run on 415 volt 3 phase or 240 volt single phase, water cooled..
|
- | |  |
ESAB
|
LAG 315 | ESAB LAG 315 MIG WELDER WITH A10 REMOTE WIRE FEED UNIT
315 amp, Binzel torch, new roll of 1mm wire, earth..
|
- | |  |
CEBORA
|
JAGUAR 2500 | CEBORA JAGUAR 2500 MIG WELDER
190 amp, with standard Binzel gun & spool on gun for Aluminium welding, gauges & earth..
|
- | |  |
SHORTE
|
1.6 LF | SHORTE 1.6 LF LOCKFORMER
1.6mm capacity with Pittsburgh and double seam rolls.
..
|
- | |  |
CMZ
|
7 | CMZ 7 HAND SWAGING MACHINE
280mm throat, 2mm capacity, with 1 set of 10mm swage rolls.
..
|
- | |  |
MEDDINGS
|
MF4 | MEDDINGS MF4/3 2MT PILLAR DRILL
8 speeds 80 – 3000 RPM, 11in x 10in T slotted rise and fall swing away..
|
- | |  |
STARTRITE
|
VOLANT 24 | STARTRITE VOLANT 24 VERTICAL BANDSAW
24in x 10in capacity, blade speeds 17 – 980 m/min, 19in x 19in tilting table, air..
|
- | |  |
AMADA
|
2532 | AMADA 2532 HYDRAULIC GUILLOTINE
2500mm x 3.2mm, rapid blade gap adjustment, programmable back stop, pneumatic rear sheet supports, squaring arm &..
|
- | |  |
MEDDINGS
|
MF5/3 | MEDDINGS MF5/3 2MT PILLAR DRILL
8 speeds 100 – 3000 RPM, 11in x 10in T slotted rise and fall swing away..
|
- | |  |
COLCHESTER
|
MASTER MK1 | COLCHESTER MASTER Mk1 GAP BED LATHE
36in x 6 ½in, speeds 54 – 1200 RPM, 4 way toolpost, 3 jaw chuck..
|
- | |  |
POLLARD
|
250 B/1 | POLLARD 250 B/1 4 MT HEAVY DUTY PILLAR DRILL
9 speeds 44 – 1070 RPM, power down feed to quill, rise..
|
- | |  |
POLLARD
|
100F/1 | POLLARD 100F/1 BENCH DRILL
1 MT, speeds 330 – 1870 RPM, 10in x 12in T slotted table, rise and fall head,..
|
- | |  |
NORVIC
|
3' X 2' TABLE | NORVIC 3FT X 2FT CAST IRON SURFACE TABLE ON STAND..
|
- | |  |
RJH
|
BUFFALO | RJH BUFFALO DOUBLE ENDED POLISHING MACHINE
2 mops with mop guards, kick stop.
..
|
- | |  |
MORGAN RUSHWORTH
|
RGM 1400/3 | MORGAN RUSHWORTH RGM 1400/3 D.D. GUILLOTINE
1400mm x 3mm capacity, front supports, programmable power back gauge, foot pedal control. 2010 m/c...
|
2010 | |  |
WORTHIGTON
|
ROLL 1500 | WORTHINGTON ROLL 1500 60CFM SCREW COMPRESSOR.
Mounted in acoustic cabinet, 3894.67 hours.
..
|
- | |  |
EXCEL
|
SWING HEAD | EXCEL SWING HEAD VERTICAL SURFACE GRINDER
7in diameter wheel, 10in x 5in magnetic chuck, grinding fixture, mounted on base.
..
|
- | |  |
TEJERO
|
23A | TEJERO 32A ROTARY MANDREL TUBE BENDER
32mm x 1.5mm capacity, 5 pres set angles, foot pedal control, formers 32mm x 75..
|
- | |  |
EDWARDS
|
1255 X 3.25 | EDWARDS TRUECUT 1255mm x 3.25mm DD GUILLOTINE
Hand back stop, interlocked rear enclosure, foot pedal control. Ex MOD.
..
|
- | |  |
AJAX
|
10IN | AJAX 10in MECHANICAL HACKSAW
2 speeds, angular vice, coolant, bar stop.
..
|
- | |  |
EDWARDS PEARSON
|
2540 X3.5 DD | EDWARDS PEARSON 2540mm x 3.5mm DIRECT DRIVE GUILLOTINE
Front supports, squaring arm, hand backstop, rapid blade gap adjustment, foot pedal operation,..
|
- | |  |
KITCHEN AND WALKER
|
E2 | KITCHEN AND WALKER E2 4'6" RADIAL ARM DRILL
4MT, Speeds 25 – 1560 RPM, power locking, 36" x 20" x..
|
- | |  |
STARTRITE
|
18V10 | STARTRITE 18-V-10 VERTICAL BANDSAW
10 blade speeds 17 - 980 m/min, 19in x 19in tilting table, 18in throat, 10in daylight, blower,..
|
- | |  |
KEMPPI
|
KEMPOMIG 3500 | KEMPPI KEMPOMIG 3500 COMPACT MIG
350 AMP, complete with Binzel torch, earth clamp & lead and regulator.
..
|
- | |  |
BRIDGEPORT
|
2JB | BRIDGEPORT 2JB TURRET MILLER
Speeds Inf Var 50 – 3750 RPM, 42in x 9in table with Inf Var feeds and rapids..
|
- | |  |
BRIDGEPORT
|
SERIES 1 2 HP | BRIDGEPORT SERIES 1 2HP TURRET MILLER
Speeds Inf Var 50 – 3750 RPM, 42in x 9in table with Inf Var feeds..
|
- | |  |
SEMCO
|
LC-165 VS | SEMCO LC-165 VS TURRET MILLER
40int spindle, inf var speeds 50 – 3750 RPM, 2 axis power feed and rapids to..
|
- | |  |
STANKO
|
24 X 8 | STANKO 24in x 8in HORIZONTAL SURFACE GRINDER
22in x 8in elector-magnetic chuck, power elevation to head, incremental downfeed, coolant, lo-volt lighting.
..
|
- | |  |
CHARMILLES
|
ROBOFIL 440CC | Taper + / - 30 degrees
Workpiece max 1200 x 700 x 400, travels X 550, Y 350, Z 400
Submerged machine..
|
2001 | |  |
BUTLER
|
21" HIGH PRODUCTION | BUTLER 21in HIGH PRODUCTION SLOTTING MACHINE
7 ½in – 21in stroke, 2'11" throat, 45" diameter tilting rotary table with feed and..
|
- | |  |
VDF BOEHRINGER
|
PNE 710TL X 2500MM | VDF-BOEHRINGER HEAVY DUTY SLANT BED 2 AXIS CNC LATHE
Model PNE 710TL x 2500mm
Serial number 1112.8165-12
Rebuilt and retrofitted 2018
Control system MITSUBISHI MELDAS M50
Height of centres 360..
|
2018 | |  |
TACCHI
|
FT 45 S CNC - 500 X 3000 | TACCHI HORIZONTAL HIGH PERFORMANCE DEEP HOLE BORING MACHINE
Model FT 45 S CNC – 500 x 3000
Year 2011
Control system SIEMENS 840 DE
Machine suitable for..
|
2011 | |  |
MOLLART
|
MATRIX DHD1510-18S | MOLLART CNC 3 AXIS DEEP HOLE DRILLING MACHINE
Model MATRIX DHD1510-18S
Year 2011
Control system FANUC 0i-MD
Drilling diameter range from solid 2 mm - 40 mm
Drilling depth Z..
|
2011 | |  |
HEYLIGENSTAEDT
|
HEYNUMAT 4U X 3000MM | HEYLIGENSTAEDT HEAVY DUTY SLANT BED 2 AXIS CNC LATHE
Model HEYNUMAT 4U x 3000mm
Year of overhaul and retrofit 1997
Serial number 00199830
Control system FANUC 0-T
Swing over..
|
1997 | |  |
DELAPENA
|
HHM 10/20 | DELAPENA HEAVY DUTY HORIZONTAL HONING MACHINE
Model HHM 10/20
Serial number P941
Component length 610 - 3050 mm
Maximum stroke 3505 mm
Bore diameter range 80 – 480 mm
Maximum component..
|
- | |  |
ALESA MONTI
|
FT 45 TG | ALESA MONTI CNC HORIZONTAL CNC MILLING AND BORING MACHINE
Model FT 45 TG
Year 2011
Control system HEIDENHAIN iTNC530
TRAVELS
X axis 2000mm Cross travel of table.
Y axis 1500mm Vertical travel of..
|
2011 | |  |
ALESA MONTI
|
FT 45 TG | ALESA MONTI CNC HORIZONTAL CNC MILLING AND BORING MACHINE
Model FT 45 TG
Year 2011
Control system HEIDENHAIN iTNC530
TRAVELS
X axis 2000mm Cross travel of table.
Y axis 1500mm Vertical travel of..
|
2011 | |  |
MAZAK
|
CYBERTECH TURN 4500M X 4000MM | Model CYBERTECH TURN 4500M x 4000mm
Year 2009 Total cut..
|
2009 | |  |
ADDISON
|
COSEN 10IN | ADDISON COSEN 10in AUTOMATIC HORIZONTAL BANDSAW
Roller feed vice, 4 blade speeds, spare blade, roller infeed table, coolant.
..
|
- | |  |
XYZ
|
PROTURN SLX 425 | Control system PROTO TRAK SLX, Distance between centres 1250mm, Swing over bed 480mm, Swing over cross slide 257mm, Swing in..
|
2014 | |  |
XYZ
|
PROTURN SLX 425 | Control system PROTO TRAK SLX, Distance between centres 1250mm, Swing over bed 480mm, Swing over cross slide 257mm, Swing in..
|
2014 | |  |
POREBA
|
TR-100B1/6M | Maximum diameter swing over bed 1000mm
Maximum diameter swing over saddle 680mm
Maximum diameter swing in gap 1250mm
Spindle bore 120mm
Distance between centres..
|
- | |  |
KINGSLAND
|
45XA | KINGSLAND 45XA COMPACT HYDRAULIC STEELWORKER
Capacities – crop 200 x 15mm / 300 x 12mm, angle 100 x 100 x 10mm,..
|
- | |  |
CHURCHILL
|
TWB | CHURCHILL TWB CNC Roll Grinder
Fanuc O-Mate
Grinding diameter 2.540 mm.
Workpiece weight 30 ton
Workpiece weight with two steadies: 70 ton
With Cambering.
Two separate..
|
1990 | |  |
CHURCHILL
|
TWR | CHURCHILL TWR PLC Roll Grinder
Grinding diameter 2.540 mm.
Workpiece weight 35 ton
Workpiece weight with four steadies: 180 ton
With Cambering.
Two separate bedways.
Hydrostatic..
|
1990 | |  |
BUTLER
|
8 INCH PRECISION TOOLROOM | BUTLER PRECISION TOOLROOM SLOTTING MACHINE
Serial number 25686
Ram stroke 1” to 8”
Cutting speeds Low range 20, 27, 38, 53 s.p.m.
..
|
- | |  |
USI
|
300 TON HYDRAULIC RUBBER PAD PRESS | Used 300 ton Hydraulic rubber pad press, 60” x 42” platen size, 12” stroke, 18"x34" rubber box, 4” deep ,..
|
- |  |  |
VERSON
|
400-HD1-20-4P, | 400 TON VERSON 4-POST DOWN-ACTING HYDRAULIC PRESS
Serial No 9273, Model 400-HD1-20-4P,
EQUIPPED WITH:
4-Post Design
Down-Acting
25 HP Oilgear Heavy Duty Hydraulic System
(Type PESB-203)
CATALOGUE..
|
- | |  |
FARNHAM
|
1558 15' AIRCRAFT FORMING ROLL | One Used 15’ FARNHAM FORMING ROLL
SPECIFICATIONS:
MAX. WIDTH: ..
|
- | |  |
FARNHAM
|
20' X .250" | 20' X .250" FARNHAM AIRCRAFT TYPE FORMING ROLL
EQUIPPED WITH:
Pedestal Controller
Variable Speed Roll Drive Motor
Top Work Roll Backed Up By (24)..
|
- | |  |
TARICCO AUTOCLAVE SYSTEM
|
ECOCLAVE EC 3X5 | Used TARICCO Autoclave System, Model EcoClave EC 3X5-150P450F-6S6P12T, 2ft x 4ft Usable work area, 160 psi, 400ºF, 2013
400 Degree Maximum..
|
2013 | |  |
TEC
|
AUTOCLAVE 7' X 26' LONG | Thermal Equipment Corporation [ ] 7’ –7” dia. x 26’ long autoclave, electric power, national board number, 1986, s.n...
|
1982 | |  |
POMINI
|
HD-425-2-7L | Siemens 840D, 12 Axes.
Two flatbed system grinding and workpiece ways are separate.
With 2 Hydrostatic Steadies.
With 4 Steadies.
Grinding length 11.000 mm
Max..
|
2008 | |  |
UNION
|
12IN X 1.5IN | UNION 12in X 1.5 in DOUBLE ENDED GRINDER, c/w tool rests and eye shields...
|
- | |  |
BOSCHERT
|
LB12PN4 | BOSCHERT LB12PN4 CORNER NOTCHER
225mm x 4mm capacity, 2 table squaring arms, back stop, foot pedal control. 1991 m/c.
..
|
1991 | |  |
COLCHESTER
|
MASCOT 1600 X 40 | COLCHESTER MASCOT STRAIGHT BED CENTRE LATHE
Model MASCOT 1600 x 40”
Serial number 7/0028/09636
CAPACITY
Distance between centres 1500 mm 60”
Swing over bed 433 mm 17”
Swing over cross slide 267 mm 10.5”
UNIVERSAL..
|
- | |  |
XYZ
|
MINIMILL 560 | Siemens 810 shopmill
Table Dimensions (mm) 610mm x 370mm
X-Travel (mm) 560mm
Y-Travel (mm) 400mm
Z-Travel (mm) 500mm
Number Of Tools In Magazine 12
Spindle Speed..
|
- | |  |
KEARNS RICHARDS
|
S TYPE | Capacities:
Main Table: 560 x 405mm
Top Table: ..
|
- | |  |
KEARNS RICHARDS
|
SF125 | Table Size 1800 x 1800mm
Max Table Load 8 Ton.
Ø810mm Facing Head.
Vertical Travel 1800mm,
Cross Travel 2000mm
Long Travel 2388mm.
Quill Travel 762mm.
Speed Range..
|
- | |  |
HARRISON
|
ALPHA 1400XT | Distance between centres 1250mm
Swing over bed (saddle wings) 400mm
Swing over cross slide 246mm
Swing in gap 585mm
Spindle bore 55mm
Spindle nose Camlock..
|
2007 | |  |
XYZ
|
SMX 2000 | R8 Spindle
Variable Speeds 60 – 4200 rpm
Table 50″ x 10″
Trak Prototrak control
Variable Speed
Power draw bar for the spindle
Low Volt Light
Coolant
Swarf..
|
- | |  |
HAAS
|
VF6 | Maximum workpiece weight 1814kg
Table size 1626mm x 711mm
X Axis Travel 1626mm
Y Axis Travel 813mm
Z Axis Travel 762mm
Min – max height..
|
2001 | |  |
MAZAK
|
PFH 4800 | SPINDLE
- Spindle speed : 15,000 rpm
- Spindle power : 22/30 kW
- Spindle taper : BT 40
AXIS
- Axis B
- Axis strokes..
|
2006 |  |  |
DOOSAN
|
4500 | X AXIS: 31,49 IN (800 MM)
Y AXIS: 17.71 IN (450 MM)
Z AXIS: 20.1 IN (510 MM)
POWER: 20 HP
RPM: 12,000 RPM
#..
|
2018 | |  |
MAZAK
|
QUICK TURN NEXUS 100-II M, | Max diameter bar capacity: 2.05"
Max swing over bed: 21.6"
Max machining length: 13.2"
Spindle motor: 15 HP
Spindle speed: 5000 RPM
Spindle nose: A2-5
Spindle..
|
2014 | |  |
MAZAK
|
QUICK TURN SMART 300M | Maximum Swing ........................... 28.35"
Swing Over Slide ........................ 16.7"
Maximum Machining Diameter .............. 16.5"
Maximum Machining Length ................ 25.725"
Bar Work Capacity ....................... 3.15"
X-Axis..
|
2012 | |  |
MAZAK
|
NEXUS QTN 450II | Swing Over Bed 33.26"
Turning Diameter, Shaft Diameter 33.2", 22.8"
Machining Length 83.5"
Distance Between Centers 83.55"
Chuck Size 16"
Spindle Nose A2 -..
|
2012 | |  |
MAZAK
|
VTC 300 C II | Type of control CNC
CNC 5-Axis Turn-/Mill Centre
x-travel 1760 mm
y-travel 760 mm
z-travel 660 mm
control MAZATROL 640M
table-size 760 x 2000 mm
table load 1 t
T-slots 18 H8
T-slot - distance 100 mm
table height..
|
2008 | |  |
MAZAK
|
510C | Cutting Speed: 8M/MINUTE
MAXIMUM TOOL DIAMETER: 80MM
Maximum Workpeice Weight: 1200KG..
|
2006 | |  |
MAZAK
|
INTEGREX E-500H II 3000U | Control Mazatrol Matrix 2
Swing diameter over the bed: 820 mm
Swing diameter over the cross slides: 820 mm
Turning diameter: max...
|
2012 |  |  |
MAZAK
|
QTN-250 1000 L | High performance CNC lathe machine is equipped with the Mazatrol Fusion 540 Nexus control. Machine is available at short..
|
2003 | |  |
XYZ
|
1020 VMC | CNC Machining Center XYZ 1020 VMC, vertical
Working travel: X: 1,020 mm Y: 520 mm Z: 546 mm
Tool magazine: 24 pcs
Control: CNC Siemens 828
..
|
2011 |  |  |
COLCHESTER
|
TRIUMPH 2000 | Gap Bed Machine
Distance between centers: 30″
Swing over bed: 15″
Swing over cross-slide: 9″
Spindle speeds: 25 to 2000 (16)
Spindle bore: 2″ clear
Full..
|
- | |  |
COLCHESTER
|
VS2500 | Colchester Triumph VS2500
FULLY REFURBISHED COMPLETE WITH NEW DRIVE!
CAPACITY
Swing over bed 400mm 15.7″
Swing over cross slide 246mm 9.6″
Height of centres 195mm 7.7″
Swing in gap 585mm 23″
Gap width from..
|
- | |  |
DECKEL
|
FP1 | x-travel: 300 mm
y-travel: 150 mm
z-travel: 340 mm..
|
1965 | |  |
HARRISON
|
ALPHA 460 PLUS |
Turning diameter: 460 mm
Turning length: 1500mm
Controller: Fanuc ..
|
1998 | |  |
HARRISON
|
ALPHA 460 PLUS |
Turning diameter: 460 mm
Turning length: 1500mm
Controller: Fanuc ..
|
1998 | |  |
DOOSAN
|
PUMA 280LM |
Controller: Fanuc Oi-TC
Turning diameter: 420 mm
Turning length: 1,030 mm
Spindle passage: 76 mm..
|
2008 | |  |
MORI SEIKI
|
NL 2000 SY 500 | Turning diameter: 356 mm
Turning length: 500mm
Control: MSX 850 maps..
|
2005 | |  |
GILDEMEISTER
|
CTV 250 V3 | Control: Siemens 840 D
Turning diameter: 250 mm
Turning length: 300mm
Control: Siemens 840 D ..
|
2001 | |  |
CHIRON
|
FZ 08 W | Control: Fanuc 21i-M
x-travel: 300 mm
y-travel: 250 mm
z-travel: 250 mm..
|
2001 | |  |
SMTCL
|
VMC 1100 B | Control: Siemens 828 D
x-travel: 1100 mm
y-travel: 610 mm
z-travel: 650 mm..
|
2015 | |  |
DECKEL
|
DMU 80 T | Control: Heidenhain TNC 430
x-travel: 880 mm
y-travel: 630 mm
z-travel: 630 mm..
|
2001 | |  |
DECKEL
|
DMU 50 | Control: Siemens 840 D
x-travel: 500 mm
y-travel: 450 mm
z-travel: 400 mm..
|
2008 | |  |