||SUPER MINI MILL 2||Immaculate 2016 Super Mini Mill 2 with 10,000 RPM spindle 20 tool changer. The Super Mini Mill 2 is enhanced..
||ST-30||Big Bore CNC Turning Centre
Swing over Bed:790mm (31.75)
Swing over Cross Slide:518mm (20.75)
Max. cutting dia.:525mm (21)
Max. cutting length:650mm (26)
Distance Between Centres:750mm..
||VF2||Haas VF2, 1997, s/n9365, c/w HRT160 4th axis, table 914 x 356mm, trav 762 x 406 x 508mm, 20atc, bt40,..
||VF0||Haas VF0, 1996, s/n 7463, table 660 x 356mm, trav 508 x 406 x 508mm, bt40, 20atc, 7500rpm, 5.6kw...
||ST 30-TCE||An immaculate, December 2011 built, March 2012 supplied, Haas ST 30-TCE CNC lathe with 10 power chuck, tailstock, tool setter,..
||SL20-TCE||This one owner 1999 built Haas SL20-TCE with Hydrafeed barfeed, tailstock, 3 Jaw chuck, tool presetter, 12 station turret and..
||SL10||2-Axis CNC lathe can only be described as superb! A one owner machine that has been superbly well maintained. Supplied..
||VF4||A superbly well maintained 2003 built Haas VF4 Vertical Machining Centre supplied with Renishaw table mounted TS27-R tool setter and..
||VF0E||Briefly, this 2001 Haas VF0E has been well looked after and offered for sale 20HP motor, swarf auger, programmable coolant..
||VF4||A very well maintained 1996 built Haas VF4 Vertical Machining Centre supplied with 20 tool ATC, swarf auger and programmable..
||TL1||One of two Haas TL1 from a local college in great condition. 2007 built with 12 screen, 3 jaw chuck,..
||TM1||X Axis 762mm
Y Axis 305mm
Z Axis 406mm
Spindle Nose to Table (~ max) 508mm
Spindle Nose to Table (~ min) 102mm
||VF-OE||Serial number: 7682
Control system: Haas
Spindle speeds: 0 - 7,500 rpm
Spindle motor: 10 hp
20 Station ATC - BT-40
Table surface area: 914..
||VF-1||with 4th Axis interface. YOM 1997
Spindle nose to table (- max) 610mm
Spindle nose to table (- min)..
||TL1||One of two Haas TL1 from a local college in great condition. 2007 built with 15 screen, 3 jaw chuck,..
||TL1||A One owner 2005 built Haas TL1 with 3 jaw chuck, quick change tool post, tailstock and coolant equipment.
||VF0||Briefly, this December 1999 Haas VF0 has been well maintained and runs well. Its fitted with a 4th drive, swarf..